CNC Machine Coding

A. Write a complete program to engrave the perimeter of the shape given in the attached document.B. Add the lines to complete pocketing the inside circle at the left side.These are the information needed to complete the assignment:1. Use an incremental coordinate system, S=2000, F=10.0, T1=1/32″ engraving tool, T2=1/4″ flat endmill tool for pocketing.2. Currently the tool is 1″ above the center point of the half circle at the right side of the design. Engraving depth = 0.05″ and pocketing depth = 0.103. Begin the cut from the center of the design and move clockwise. Upon finishing the cuts move the tool to its original initial position.